No. 7 & 7A,
Jalan Tiara, Tiara Square,
Taman Perindustrian Sime UEP,
47600 Subang Jaya,
Selangor, Malaysia.
+603-8023 9829
+603-8023 7089
Fictron Industrial Supplies Sdn Bhd
No. 7 & 7A,
Jalan Tiara, Tiara Square,
Taman Perindustrian Sime UEP,
47600 Subang Jaya,
Selangor, Malaysia.
No. 7 & 7A,
Jalan Tiara, Tiara Square,
Taman Perindustrian Sime UEP,
47600 Subang Jaya,
Selangor, Malaysia.
Fictron Industrial
Automation Pte Ltd
140 Paya Lebar Road, #03-01,
AZ @ Paya Lebar 409015,
Singapore.
+65 31388976
sg.sales@fictron.com
Automation Pte Ltd
140 Paya Lebar Road, #03-01,
AZ @ Paya Lebar 409015,
Singapore.
+65 31388976
sg.sales@fictron.com
Carbon fiber composites are unbelievably strong for their weight; that¡¯s why they¡¯re key to the late
15 Jul 2019
View Full Size
Carbon fiber composites are unbelievably strong for their weight; that’s why they’re key to the hottest aircraft designs. However, they’re only durable in one direction, so they’re usually layered or woven in grid patterns before being shaped into structures. That means one set of fibers carries the load some of the time, and another set carries it at other times—which is not the most efficient use of the material.
In 2014, Hemant Bheda was CEO of Quantum Polymers, a company that makes extruded plastic rods, plates, and other shapes for machined parts. The company used chopped up carbon fiber in some of its materials, but a potential customer asked for a material which would need continuous carbon fiber to be embedded in a polymer material in carefully laid paths that would give the material super mechanical properties.
“I said that we couldn’t do it,” Bheda recalls, but he kept thinking about that request. As he says was typical for him, an EE whose career has concentrated on software, and particularly on image compression and video, he kept wondering if the issue was a software problem instead of a hardware problem.
Then, he says, he came across a paper about 3D printing. Why, he thought, “can’t we come up with an algorithm for optimal orientation of the fiber in 3-D space and only use the fiber in the directions you need it?”
Bheda joined with Wiener Mondesir to start a company to explore this possibility. They named their company Arevo for “a revolution in manufacturing.”
With backing from an aircraft company, they spent two years trying to build a 3D-printing system and software that could make production parts that met aerospace demands. The system was dependent on traditional fused deposition 3D printers, which are the kind that people use at home. The conductive heating process used to melt the material, which was a composite of a polymer and continuous carbon fiber, was slow. And it didn’t meet the mechanical and quality needs of the aerospace industry, Bheda said. “We knew we necessary to move to a laser-based system [that could give us faster,] contact-less heat transfer without fraying the fibers.”
That, however, would take more time, more people, and more money. In late 2016, Bheda and Mondesir pitched venture capitalist Vinod Khosla on the concept. “He got it straight away,” Bheda said, as did Bill Gates, who Khosla quickly brought in to meet with the Arevo team. They “immediately comprehended the potential, that our approach was a radical departure from the current way fibers are stacked, that it would optimize how we used the fibers, [and] lead to less material” being needed, Bheda said.
Khosla Ventures put US $7 million into the company. After increasing additional rounds from investors including Airbus, Arevo’s funding now totals $34 million. The company has 35 employees, with an engineering team of 25, including 14 engineers or scientists with Ph.D.s.
Arevo’s goal has continuously been to get its process working well adequate to make aircraft parts. And that’s still on the agenda. But like so many Silicon Valley startups, Arevo wasn’t opposed to making a little pivot along the way.
In March of 2018, the team began planning a demo for the company’s Series A investors. They had software—which uses data of the direction of stress on a selected part to inform the optimal layout of the carbon fiber filament—ready to go, and had built a prototype laser-based 3D printer. As the engineers brainstormed possibilities for what to produce, Bheda recalls, “Someone said, ‘Why don’t we print a bike?’”
Why not? But they recommended a bike design. They got it from experienced bike design firm Studiowest, where, Bheda says, the designers “were happy by how the technology could push the limits of design.”
In addition to letting new shapes, printing a bike frame would immensely simplify its construction. Traditional bike frames contain dozens of parts that have to be assembled by hand, a complex processes with lots of room for error.
The designers at Studiowest “sent us a design, offered us with the design specifications including the load, and we ran it through our software,” Bheda said. “The software told us how to orient the fibers. We then printed the bike and sent it to a local bike shop” to add hardware like wheels and pedals and brakes, he said.
“Then all of us rode it,” Bheda said. “It worked, it felt like a bike, but it didn’t seem like any big deal.”
Then, the designers came over and rode the bike. ““They were very amazed that it rode precisely how they had set it to be,” Bheda said. “We wondered why they were astonished; they revealed that they usually go through multiple iterations of design, ride, make some changes, ride again. It usually takes a long time, as much as 18 months, but in less than 14 days from the time that they sent the design, we had the bike.”
The bicycle designers urged Arevo to show the product to the CEOs of large commercial bike companies. They did so in April 2018, at the Sea Otter Classic in Monterey, the largest consumer bike show in North America.
“The CEOs we met with were fascinated, but skeptical,” Bheda said. “They thought it was too good to be true.” But the showcase, along with a little help from some personal connections, led Arevo to electric bike startup Emery. And this April, the Arevo team was back at the Sea Otter show, watching the introduction of Emery’s electric bike with a 3D-printed carbon fiber composite frame.
Since the show, Emery has been taking orders for the Emery One e-bike and will start shipping to customers this quarter. When I visited Arevo in June, the company had two of its five printers laying down bike frames; it estimated to have all five printing bike frames within a matter of weeks, which will allow it to build 10 bike frames per week. Then, the company expects to increase the speed of the process until production hits 75 frames per week.
The system looks like the kind of desktop printers that use coils of PLA as feedstock, with a few significant differences. Arevo’s version is a lot heavier and uses an industrial robotic arm as its core. And there’s an extra step in the graceful choreography of laying down the strings of material—the cut—because the carbon fibers in the composite don’t just break perfectly on their own when the print head stops heating and pulls away. Finally, there is the printer bed—instead of a flat platform, it’s a 3-D structure, printed from plastic, that permits the carbon fibers to be draped at angles, instead of needing those angles to be built up out of layers. This is an essential part of making sure fibers are oriented in the right direction.
New bike designs that take extra advantage of 3D printing are on the drawing board. Arevo is definitely working with another yet-to-be-announced bike manufacturer on a radically different design, with just one fork for the front wheel and other unusual features. And Arevo will be in the bike manufacturing business for the foreseeable future, because the plan, at least for now, is not to sell printers to others, but to market its software and printing capabilities as a service, holding the manufacture of any merchandise in house. It also has a lab, in which it commonly checks samples of the carbon fiber composite as it comes in from a supplier, and comes out of the printers, priding itself on avoiding so-called “voids,” areas in which gaps form between the layers of material.
“The technology is new,” Bheda says, “so we don’t want to lose contact with the end customer; if we don’t make the parts ourselves, we won’t learn about issues and be able to improve the technology.”
Eventually, Bheda says, the company will get back to those aircraft parts, after the bike business demonstrates out its technology. Arevo is also eyeing wind energy and building construction as potential future markets.
And then there are flying cars. That’s not a joke. Bheda says the flying car market could turn out to be Arevo’s sweet spot. “They will be manufactured in a larger volume than airplanes, the manufacturing technology being used for current aircraft won’t scale to that, and they want to use thermoplastic. Our technology is at least three years ahead of any other thermoplastic technology, so we will be ready.”
This article is originally posted on Tronserve.com
In 2014, Hemant Bheda was CEO of Quantum Polymers, a company that makes extruded plastic rods, plates, and other shapes for machined parts. The company used chopped up carbon fiber in some of its materials, but a potential customer asked for a material which would need continuous carbon fiber to be embedded in a polymer material in carefully laid paths that would give the material super mechanical properties.
“I said that we couldn’t do it,” Bheda recalls, but he kept thinking about that request. As he says was typical for him, an EE whose career has concentrated on software, and particularly on image compression and video, he kept wondering if the issue was a software problem instead of a hardware problem.
Then, he says, he came across a paper about 3D printing. Why, he thought, “can’t we come up with an algorithm for optimal orientation of the fiber in 3-D space and only use the fiber in the directions you need it?”
Bheda joined with Wiener Mondesir to start a company to explore this possibility. They named their company Arevo for “a revolution in manufacturing.”
With backing from an aircraft company, they spent two years trying to build a 3D-printing system and software that could make production parts that met aerospace demands. The system was dependent on traditional fused deposition 3D printers, which are the kind that people use at home. The conductive heating process used to melt the material, which was a composite of a polymer and continuous carbon fiber, was slow. And it didn’t meet the mechanical and quality needs of the aerospace industry, Bheda said. “We knew we necessary to move to a laser-based system [that could give us faster,] contact-less heat transfer without fraying the fibers.”
That, however, would take more time, more people, and more money. In late 2016, Bheda and Mondesir pitched venture capitalist Vinod Khosla on the concept. “He got it straight away,” Bheda said, as did Bill Gates, who Khosla quickly brought in to meet with the Arevo team. They “immediately comprehended the potential, that our approach was a radical departure from the current way fibers are stacked, that it would optimize how we used the fibers, [and] lead to less material” being needed, Bheda said.
Khosla Ventures put US $7 million into the company. After increasing additional rounds from investors including Airbus, Arevo’s funding now totals $34 million. The company has 35 employees, with an engineering team of 25, including 14 engineers or scientists with Ph.D.s.
Arevo’s goal has continuously been to get its process working well adequate to make aircraft parts. And that’s still on the agenda. But like so many Silicon Valley startups, Arevo wasn’t opposed to making a little pivot along the way.
In March of 2018, the team began planning a demo for the company’s Series A investors. They had software—which uses data of the direction of stress on a selected part to inform the optimal layout of the carbon fiber filament—ready to go, and had built a prototype laser-based 3D printer. As the engineers brainstormed possibilities for what to produce, Bheda recalls, “Someone said, ‘Why don’t we print a bike?’”
Why not? But they recommended a bike design. They got it from experienced bike design firm Studiowest, where, Bheda says, the designers “were happy by how the technology could push the limits of design.”
In addition to letting new shapes, printing a bike frame would immensely simplify its construction. Traditional bike frames contain dozens of parts that have to be assembled by hand, a complex processes with lots of room for error.
The designers at Studiowest “sent us a design, offered us with the design specifications including the load, and we ran it through our software,” Bheda said. “The software told us how to orient the fibers. We then printed the bike and sent it to a local bike shop” to add hardware like wheels and pedals and brakes, he said.
“Then all of us rode it,” Bheda said. “It worked, it felt like a bike, but it didn’t seem like any big deal.”
Then, the designers came over and rode the bike. ““They were very amazed that it rode precisely how they had set it to be,” Bheda said. “We wondered why they were astonished; they revealed that they usually go through multiple iterations of design, ride, make some changes, ride again. It usually takes a long time, as much as 18 months, but in less than 14 days from the time that they sent the design, we had the bike.”
The bicycle designers urged Arevo to show the product to the CEOs of large commercial bike companies. They did so in April 2018, at the Sea Otter Classic in Monterey, the largest consumer bike show in North America.
“The CEOs we met with were fascinated, but skeptical,” Bheda said. “They thought it was too good to be true.” But the showcase, along with a little help from some personal connections, led Arevo to electric bike startup Emery. And this April, the Arevo team was back at the Sea Otter show, watching the introduction of Emery’s electric bike with a 3D-printed carbon fiber composite frame.
Since the show, Emery has been taking orders for the Emery One e-bike and will start shipping to customers this quarter. When I visited Arevo in June, the company had two of its five printers laying down bike frames; it estimated to have all five printing bike frames within a matter of weeks, which will allow it to build 10 bike frames per week. Then, the company expects to increase the speed of the process until production hits 75 frames per week.
The system looks like the kind of desktop printers that use coils of PLA as feedstock, with a few significant differences. Arevo’s version is a lot heavier and uses an industrial robotic arm as its core. And there’s an extra step in the graceful choreography of laying down the strings of material—the cut—because the carbon fibers in the composite don’t just break perfectly on their own when the print head stops heating and pulls away. Finally, there is the printer bed—instead of a flat platform, it’s a 3-D structure, printed from plastic, that permits the carbon fibers to be draped at angles, instead of needing those angles to be built up out of layers. This is an essential part of making sure fibers are oriented in the right direction.
New bike designs that take extra advantage of 3D printing are on the drawing board. Arevo is definitely working with another yet-to-be-announced bike manufacturer on a radically different design, with just one fork for the front wheel and other unusual features. And Arevo will be in the bike manufacturing business for the foreseeable future, because the plan, at least for now, is not to sell printers to others, but to market its software and printing capabilities as a service, holding the manufacture of any merchandise in house. It also has a lab, in which it commonly checks samples of the carbon fiber composite as it comes in from a supplier, and comes out of the printers, priding itself on avoiding so-called “voids,” areas in which gaps form between the layers of material.
“The technology is new,” Bheda says, “so we don’t want to lose contact with the end customer; if we don’t make the parts ourselves, we won’t learn about issues and be able to improve the technology.”
Eventually, Bheda says, the company will get back to those aircraft parts, after the bike business demonstrates out its technology. Arevo is also eyeing wind energy and building construction as potential future markets.
And then there are flying cars. That’s not a joke. Bheda says the flying car market could turn out to be Arevo’s sweet spot. “They will be manufactured in a larger volume than airplanes, the manufacturing technology being used for current aircraft won’t scale to that, and they want to use thermoplastic. Our technology is at least three years ahead of any other thermoplastic technology, so we will be ready.”
This article is originally posted on Tronserve.com